Bluebell Crafts

Archive for November, 2011

Lace makes attractive material no matter where you add the designs. If you have already made decorative towels, you are ready to add your lace and serger edges. If you have not stitched your decorative towels, you will need to learn the steps to get started. Otherwise, you can add lace trimming and serger edges to finish towels you have purchased. Terry cloth towels look great when lace and serger finishes are attached. To get started, continue reading.

How to get started with lace trimming:
To get started you will need a plain or unadorned towel, and lace edges, as well as a galloon, i.e. the ornamental trimming lace. The narrow bands of embroidery should consist of lace, braids, or thread colors of gold and silver. Preferably, you want lace. Make sure that the material is machine washable. Purchase the medium-weight lace, such as the taffeta, satin, or polyester.

How to create lace trimming for bathroom towels:
Once you have your materials gathered: (1) use the decorative trimming and cut an inch of the lace, cutting until it extends considerably a distance of your towel width. About a half-inch, fold the fabric under, folding it at the ends. In the desired position, pin the lace to your towel. You want the pins over the lower borders or edges. (2) Along the ends you have folded, stitch. Stitch along the edges of your scallop sides, keeping your stitching in a straight line. (3) Use the edges of your lace and repeat step one. You want the lace this time to fasten to the lower borders. Along the end folds, stitch and continue to the upper borders. Keep in a straight line. You should be finished at this point, unless you need to finish the upper borders of your lace. In this instance, on the opposite side of the bias band, cover it. Now you are ready to create your over-lock finished edges.

How to create serger, finished edges:
You will need plain material and a special needle, such as the tapestry. In addition, you will need nylon, combined threads of wool, contrasting threads of normal value, etc to get started.

How to stitch:
(1)    Your serger should be set at three-threads, to equalize your stitch, which creates the serger. Both of your loopers should be threaded as well. Use your nylon threads and common thread. Heave the thread through your needle and prepare your stitch so that it is set to desired widthwise position. The length should be set at least one (mm) (2) along the selvages, start stitching whilst holding in place the tail string tight. You want to avoid trimming the edge of your cloth. The tails should be left at the extremity of your cloth. (3) Now, you will need a stitching needle. Thread it. About one inch and begin weaving your tapestry needlework so that it falls beneath the stitches at your serger. The tail strings may have extra length, which you will need cutting tools designed for sewers to cut it off.
(2)    Once you finish your lace and serger, you may want to add a few other bathroom accessories to set off your patterns. Try considering creative towel hooks, rings, and bars.

A variety of rings, hooks, and bars are available online, including the medallion designs, which comprise bold backs. The stylish designs will offset your new-laced towels. You can also find the iron bolder, which tie back. The items bring luxury to your bath. Décor wooden pole sets are available, as well as many other designs to bring out your new towels. Now that you have your rings, hooks, bars, and towels you might want to offset the room further by adding bordered mirrors.

Doll dresses are fun to make. First, however you must learn the rules for beginners to make quality designs. To start you will need to consider fabric. Some people like multi-colored clothing, however the clothes must harmonize to deliver quality dresses.

To make sure that you accomplish quality doll dresses, you will need the right equipment and tools. You will need a sewing machine, cleansers, universal needles, including stretch needles, pins, olfaa panel, and a rotary or gyratory cutter. You will also need hand-sew needles, dressmaker scissors, sewing scissors, fabric glue and pen, greaseproof paper for tracing, pencil, measuring tape, lace, ribbons, fasteners, elastic, paper scissors, etc.

Before you get started, you will need to clean your sewing machine. Use “Dust Away,” to spray your machine near the bobbin region. You will also need to clean the bar where the needles are installed, as well as the “tension” discs at the top. Once you clear the machine of dust, use a drop of oil.

Now you are prepared to make doll dresses. Before I forget, make sure you have thread, specifically DMC broder if you intend to make French dresses.

How to trim:

You can use the pin tuck method to trim your doll dress. You will need twin needles, and a foot that is designed for pin tucking. Set up your machine. The right needle should be clockwise while the left counterclockwise. At the “tension” discs, you should have the left needle threaded on the same side, and the right needle threaded on the right thread. To keep your dresses fresh, you can use starch to spray your dress prior to pin tucking.

How to pin tuck skirts:

When pin tucking skirts make sure you leave some space.

How to pin tuck sleeves and/or bodice:

Take a square of your fabric and pin tuck it. You can cut out the upper section of the dress and/or sleeves after. Keep in mind when you start pin tucking for sleeves and bodice, the fabric size is modified, or reduced.

If you are not familiar with pin tucks, you can tuck your doll dress. To tuck you merely consider the size and width of your garment. To start you press down, pressing the folded center. Along the fold and edge of your fabric, stitch the width precisely. As long as you stay consistent within your stitching lines, you will do fine. You should always start sewing at the grain after pulling a single thread.

After you complete your dress, or near the finish, you may want to consider bows, tassels, smock, or hand sewn objects. Hand embroidering is ideally used in finishing. Use a range of DMC embroidery to make finish your dress.

Smocking is the added finishing whereas you use patterns to complete your dress. Silk ribbons, satin single and double ribbons make up a great pinafore, or back dressing.

Tassels are easy to make, yet you will, need crochet threads and/or embroidery thread to complete your mission. You will also need cardboard in which you will need to cut out a part a length longer than your tassel. Use your thread, wound it around the cut part, and continue until you have achieved the thickness you desire. At one end of the part, use the same thread and channel it through the thickness. Next, tie the thread so that it knots and at the opposite end of your part, cut. Do not cut your thread. Now you are ready to make your tassel.

To finish, at the knotted region, convey your thread so that it meets with your tassel. Next, wound another part of thread about the finish of your tassel a few times. Knot the area so that it is taut. At the finish of your tassel, skid the thread in to fasten your finished work. If the finish necessitate cutting to make sure it is constant, do so now.